The STM32F030C8T6 microcontroller is a 32-bit M0 series LQFP-48 microcontroller, a cost-effective ARM microcontroller, which is widely used in the electric vehicle and home appliance industry. It is cracked for the STM32F030C8T6 microcontroller.

The TM32F030x4/x6/x8/xc microcontrollers contain a high-performance ARM® Cortex®-m0 32-bit RISC core running at 48 MHz, high-speed embedded memory (up to 256 kilobytes of flash memory and up to 32 kilobytes of SRAM), as well as a wide range of enhanced peripherals and I/O. All devices provide standard communication interfaces (up to two I2cs, up to two SPIs, and up to six USARTs), a 12-bit ADC, seven general-purpose 16-bit timers, and an advanced control PWM timer.

The STM32F030X4/X6/X8/XC microcontrollers operate over a temperature range of -40 to +85°C with a supply voltage of 2.4 to 3.6V. A comprehensive set of power saving modes allows designing low power applications. The STM32F030x4/X6/X8/XC microcontrollers include devices in four different packages, ranging from 20-pin to 64-pin. Depending on the device selected, different peripherals are included.

These features make STM32F030x4/X6/X8/XC microcontrollers suitable for various applications such as application control and user interface, handheld devices, A/V receivers and digital TVs, PC peripherals, gaming and GPS platforms, industrial Applications, PLCs, inverters, printers, scanners, alarm systems, video intercoms and HVAC.

Main features:

1. 16 to 256kb of flash memory

2, 4 to 32 kbytes of memory HW parity

3. Digital and I/o supply: VDD = 2.4V to 3.6V

4. Analog supply: VDDA = VDDto3.6 V

5. Power-on/power-off reset (POR/PDR)

6. Low power consumption mode: sleep, stop standby

7. 4 to 32MHz crystal oscillator

8. Calibration of 32 kHz oscillator RTC

9. Selection of internal 8MHz RCx6 phase-locked loop

10. Internal 40kHz RC oscillator