The STM32F407ZGT6 is based on a high-performance ArmCortex-M4 32-bit RISC core and operates at up to 168 MHz. The Cortex-M4 core uses floating point unit (FPU) single precision and supports all Arm single precision data processing instructions and data types.

The STM32F407ZGT6 also implements a full set of DSP instructions and a memory protection unit (MPU) for enhanced application security. The STM32F407ZGT6 contains high-speed embedded memory (up to 1 MB of flash, up to 192 KB of SRAM), up to 4 KB of backup SRAM, and connections to two APB buses, three AHB buses, and a 32-bit multi-AHB bus matrix.

The STM32F407ZGT6 devices all provide three 12-bit ADCs, two DACs, a low-power RTC, and twelve general-purpose 16-bit timers, including two PWM timers for motor control, and two general-purpose 32-bit timers. True Random Number Generator (RNG). They also have standard and advanced functional communication interfaces.

Main features of STM32F407ZGT6:

LCD parallel interface, 8080/6800 mode clock, reset and power management

–1.8 V to 3.6 V application power and I/O

– POR, PDR, PVD and BOR

–4 to 26 MHz crystal oscillator

– Internal 16 MHz factory trimmed RC (1% accuracy)

–32 kHz oscillator for RTC with calibration

– Internal 32 kHz RC with calibration

low power operation

– Sleep, Stop and Standby modes

– VBAT power supply for RTC, 20×32 bit backup

Register + optional 4 KB backup SRAM

3 x 12-bit, 2.4 MSPS A/D converters: up to 24

2×12-bit D/A converter

General-purpose DMA: 16-stream DMA

Up to 17 timers: up to 12 16-bit timers and 2 32-bit timers - up to 168 MHz bit timers, up to 4 each

IC/OC/PWM or pulse counter and quadrature (incremental) encoder inputs

debug mode

– Serial Wire Debug (SWD) and JTAG interface

– Cortex-M4 embedded micromacro cells

Up to 140 I/O ports with interrupt capability

– Up to 136 fast I/Os up to 84 MHz

– Up to 138 5 V tolerant I/O

Up to 15 communication interfaces

– Up to 3 I2C interfaces (SMBus/PMBus)

– Up to 4 USARTs/2 UARTs (10.5 Mbit/s, ISO

7816 interface, LIN, IrDA, modem control)

– Up to 3 SPIs (42 Mbits/s), 2 with multiplexing

– 2 CAN interfaces (2.0B active)

–SDIO interface

Advanced connection

–USB 2.0 Full Speed ​​Device/Host/OTG

Controller with on-chip physical layer

– USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, on-chip full-speed PHY and ULPI

– 10/100 Ethernet MAC with dedicated DMA: supports IEEE 1588v2 hardware, MII/RMII

The above STM32F407ZGT6 model specifications are organized by ShenZhen Hao Qi Core Technology editor. If you need to purchase materials of this model, please contact us.